Norlake Stability Chamber

Nor-Lake Scientific Humidity Stability Chamber-Refrigerated Incubator

• Model NRSI241WSW/OH
• 24 Cubic foot capacity
• Temperature range: +4°C to +70°C
• 90-day warranty

Nor-Lake Scientific Humidity Stability Chamber-Refrigerated Incubator, Digital 132 x 64 LED display, Programmable logic (PLC) microprocessor temperature controller, Audible and visual Hi/Lo temperature alarm, Adjustable temperature and humidity control range: +4°C to +70°C, Humidity transmitter (0-10 VDC), Temperature transmitter (0-10 VDC) (selectable to air temperature), Programmable ramp and soak, Remote alarm contacts, Continuous product temperature display, 3 sensor system, 1 product, 1 air, 1 coil temperature, Sensor access port 1” diameter, Power supply breaker and convenience power switch located on facade, Door ajar alarm, audible and visual, Password protection – set-points and factory settings, 100 event alarm logging date/time stamp, Integrated Hi/Lo product temperature alarm test, Digital calibration air and product, Real time clock with date and time display, Adjustable alarm beep or constant on (key pad selectable), Alarm volume adjustable manually, Low battery test switch with buzzer.

CLICK HERE to see the Nor-Lake Humidity Stability Chamber on our YouTube channel

Perimeter anti-condensate door frame (temperature selectable heater wire), Sensor failure alarm, Power failure alarm, Exterior cabinet front, sides and back are powder coated, Exterior cabinet top and bottom are galvanized steel, Interior cabinet liner is stainless steel, Cabinet is foamed-in-place with CFC free high density, polyurethane foam insulation, Solid doors(s), full size, Heavy duty door pivot hinges, Pull door handles, full length, Magnetic door gaskets, Centered key door lock(s) (2 keys), Four casters on one and two door models (2 locking), Six casters (3 locking) on three door models, 3 coated wire shelves per door section, Interior drain with plug, Top mounted forced air refrigeration system, Condensate evaporation, LED lighting.

Most of our equipment is used and reconditioned. Our technicians test incubators using a calibrated digital chart recorder to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

Nor-Lake Scientific Humidity Stability Chamber-Refrigerated Incubator - Specifications

For inquiries about the Nor-Lake Scientific Humidity Stability Chamber-Refrigerated Incubator, please give us a call at 978-521-2221, or fill out the form on this page.