Heraeus Heracell 240

Heraeus Heracell 240 incubator

• Copper lined for superior decontamination
• High humidity recovering times up to five times faster than conventional water tray designs
• Temperature controlled between 5°C above ambient to 55°C.
• 8.4 cubic foot chamber volume – 24 inches wide by 26 inches high by 22.5 inches deep
• 90 day warranty

The Heraeus Heracell 240 CO2 incubator is an ideal choice for the growth of cell and tissue cultures providing a perfect environment by controlling temperature and CO2 levels within an elevated humidity chamber. These units feature a copper lined interior and shelves for natural fungicidal and germicidal effect which combined with the system’s automatic programmed ContraCon decontamination routine make for a simple and highly effective sterilization process between product runs. The design of the water reservoir provides a humidity recovery time after door opening up to five times faster than common CO2 incubators with water trays.

Click Here to see the Heracell 240 incubator on the American Instrument Exchange YouTube channel.

The Heracell 240 has a temperature operating range between +5°C above ambient to 55°C (+/- 0.5°C at 37°C). CO2 content in the chamber can be regulated between 0-20% (+/- 0.1%) Relative humidity is maintained at either 90% or 95% determined by the user.

Chamber dimensions are: 24 inches wide by 26 inches deep by 22.5 inches deep and approximately 8.4 cubic feet. External dimensions are: 30.75 inches wide by 37 inches high by 32 inches deep. Power requirements are 120VAC, 50/60 Hz, 5.4A, 650W.

All of our incubators are used and reconditioned. We test incubators using a calibrated digital chart recorder to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.