Boekel Microcooler II 260010

Item: 0818B BATH

FULLY TESTED & WARRANTIED*


All products ship from our 30,000 sq. ft. Haverhill, MA warehouse


Contact Us

Call 978-521-2221
to request information & pricing for item 0818B BATH

90-Day Warranty

American Instrument Exchange
Contact us for all your used lab equipment needs

1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822

Email: info@americaninstrument.com

Shipping Policy

Boekel MicroCooler II Cold Well Incubator

The Boekel MicroCooler II cold well incubator is a compact and convenient alternative to expensive and bulky refrigerated water baths. The MicroCooler II is an ideal way for labs to incubate or store samples at temperatures from ambient down to 18°C below ambient, typically 4°C.

The unit’s simple “press to set” controller makes it perfect for maintaining those “difficult” sub ambient temperatures such as the 14°C used in nick translations and ligation reactions or the 17°C used to store oocytes.

Boekel MicroCooler II – Specifications

  • Model 260010
  • Temperature range 4°C to 22°C
  • 24 x 1.5mL rack
  • 90-day warranty

Boekel MicroCooler II – Features

The MicroCooler II has a 5.75” x 2” well which accommodates a rack holding up to 21 x 1.5 mL microcentrifuge tubes. The MicroCooler II’s well has a one-piece construction which allows for the use of water or other liquids in the well.

For best temperature transfer uniformity and most efficient heat transfer, fill the cooling well with water to a depth of about 3 cm. As a matter of safe practice, volatile and flammable liquids should not be used in the MicroCooler II well.

Under typical lab ambient temperatures and low humidity, the MicroCooler II has an operating range of ambient down to 18°C below ambient, typically 4°C. The well temperature will typically fluctuate less than +/-1.0°C around the set point under normal operating conditions. Excessively high ambient temperatures or high humidity may negatively affect the MicroCooler II’s performance.

Testing

The Boekel MicroCooler II is used and reconditioned. Our technicians test all water baths to confirm that they operate properly and verify temperature with an external probe.

While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run.

Additionally, if you have specific testing requirements or requests, please inform us. We will gladly work with you to ensure these requirements are addressed during testing.

Boekel MicroCooler II - Additional Specifications

Temperature Range

4°C to 22°C

Accuracy

+/- 1°C of set point

Capacity

24 x 1.5mL

Well dimensions

2.25”L x 5.75”W x 2.25”H

Overall dimensions

9.75”W x 11.34”D x 7.25”H

Electrical requirements

115V, 100W

Weight

Approx 12lbs.

 

Pictures

The photos above represent our equipment, which is currently stored in our warehouse. Since we often stock multiple units of each model, we may not feature photos of every unit. However, if you request, we will provide photos of your specific equipment after we test and clean it.

For inquiries about the Boekel MicroCooler II Cold Well Incubator, call us at 978-521-2221 or fill out the form on this page.