FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
The Beckman Coulter Avanti J-30i High-Performance Centrifuge is a solid, dependable floor model centrifuge that has become a customer favorite, in part because of the wide variety of compatible rotors.
Compatible rotors for the Avanti J-30I centrifuge include the following models: JLA-30.50Ti, JA-25.50, JA-25.15, JA-20.1, JA-21, JA-20, JA-18, JA-18.1, JA-17, JLA-16.250, JA-14, JA-12, JLA-10.500, JA-10, JLA-9.1000, JS-24.15, JS-24.38, JS-13.1, JS-7.5, JS-5.9, and the JCF-Z zonal rotor.
The Beckman Avanti J-30i delivers ultracentrifuge power with unmatched efficiency and versatility. This advanced system, when paired with a JA-30.50 rotor, achieves separation forces exceeding 100,000 x g. As a result, you can complete the fastest separations in the shortest time, boosting your lab's productivity effortlessly.
CLICK HERE to see the Beckman Avanti J-30i on our YouTube channel
With the JS-24.38 swinging bucket rotor, you can effectively perform rate zonal centrifugation to separate subcellular organelles with precision. Need to process 4 liters at once? Simply combine the Avanti J-30i with a Beckman JLA-9.1000 rotor for high-throughput bacteria and cell membrane isolation.
Beyond its versatility, the Avanti J-30i features rapid acceleration and deceleration, low heat output, and energy-efficient operation. These features ensure consistent performance while maintaining optimal laboratory conditions, making it an indispensable asset for high-demand applications.
This Beckman Avanti J-30i used and reconditioned. Our expert technicians meticulously test every centrifuge to ensure optimal performance and reliability, leaving no detail overlooked. They thoroughly balance the rotating assembly, inspect the bearings, seals, and gaskets, and confirm the proper functioning of all controls.
For refrigerated centrifuges, they verify the unit reaches and maintains the desired temperature accurately. All tolerances are carefully measured, and both the interior and exterior are fully cleaned for a polished finish. When sold with a rotor, technicians test the rotor and centrifuge combination together for seamless operation.
Rotors undergo a rigorous inspection process, including buckets, gaskets, and overspeed disks. Fixed-angle rotors are assessed for body integrity, while swinging bucket rotors are checked for proper weight distribution. Whenever possible, each rotor is run in a compatible centrifuge to confirm flawless performance, ensuring you receive equipment that meets the highest standards.
|
Speed Range |
to 30,000 rpm |
|
Capacity |
4 x 1000ml |
|
Temperature Range |
-20oC to +40oC |
|
Dimensions |
28”W x 34”D x 34”H |
|
Weight |
680 lbs. |
The photos above represent our equipment, which is currently stored in our warehouse. Since we often stock multiple units of each model, we may not feature photos of every unit.
However, if you request, we will provide photos of your specific equipment after we test and clean it.
For inquiries about the Beckman Avanti J-30i High Performance Centrifuge, call us at 978-521-2221 or fill out the form on this page.
Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.
All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.
For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.
Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.
Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Yes – please see our repair services page for more information.
