FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
Thermo 3310 SteriCult CO2 incubator
The Thermo 3310 SteriCult CO2 incubator is ideal for cell culture work. The Thermo 3310 SteriCult features integral 140°C high-temperature sterilization function that simplifies cleaning protocols and optimized airflow system that does not interfere with samples or incubator function, as well as in-chamber HEPA air filtration continuously removes particulates for Class 100 quality conditions. The Thermo 3310 allows users to carry out high-volume culturing with strict contamination controls. The on-demand 140°C sterilization cycle eliminates contamination from internal surfaces and an audible alarm activates if outer door is opened during the cycle or if temperature reaches 60°C (140°F) or greater. An access code prevents accidental initiation of the cycle.
Click Here to see the Thermo 3310 Steri-Cult C02 on the American Instrument Youtube Channel
The in-chamber HEPA air filtration system reduces particulates in the chamber to Class 100 cleanroom levels and preserves the aseptic culturing environment. Even after the chamber door is opened during sample retrieval or addition, the optimized airflow system returns the chamber to Class 100 air quality within five minutes.
The external humidification system reduces the risk of waterborne contamination in the chamber and culture area and allows for simple visual water level monitoring, eliminating the need to open the incubator door and thus further reducing the risk of any contamination of the samples.
Our technicians test CO2 incubators using a calibrated digital chart recorder to verify the accuracy of temperature controls and readouts, as well as using a Fyrite indicator to measure CO2 levels in the chamber. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.
Thermo 3310 CO2 Steri-Cult incubator specifications
Disinfection Time: 14 hours total cycle, 140°C
CO2 Concentration Range: 0 to 20%
CO2 Sensor Technology: IR
Humidity Delivery: external reservoir
Relative Humidity: Ambient to 95%, controlled
Temperature Range: 5° to 50°C
Weight: 410 lb.
CO2 Concentration Control: ±0.1% at 5%
Capacity: 11.4 cu.ft.
Interior Dimensions (D x W x H): 20.6” x 28.8” x 32.8”
Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.
All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.
For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.
Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.
Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Yes – please see our repair services page for more information.
