FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
The Fisher Dual Chamber Hybridization Incubator is designed to process nucleic and protein blots derived from hybridization procedures. Incubator heat is accurately controlled to precisely maintain the chamber temperature.
Temperature can be set between slightly above ambient and 85°C and is easily set by simple controls on the front panel. A large, bright display shows actual temperature during operation. The incubator features keypad protection, which prevents the set temperature from being changed. This is useful when setting up a processing program where the unit will be unattended.
Programmable offset temperature to compensate for the actual temperature inside a typical sample loaded into the tubes. The incubator can monitor and store the maximum deviation of the actual temperature from the set temperature.
Monitor temperature deviation and save during processing and recalled later. A separate safety thermostat limits the incubator temperature to approximately 95°C in the event of a temperature controller failure. An indicator on the front panel shows when this condition exists.
A rotisserie holds the sample tubes and rotates to provide membrane coverage. Rotisserie rotation speed can be varied by a knob on the front panel. A jog control permits rotating the rotisserie in steps to insert and remove tubes.
The incubator has a glass door for observing samples during processing. Interior surfaces are stainless steel for high durability and low maintenance.
This rotisserie incubator is used and reconditioned. Our technicians test incubators using a digital temperature probe to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment.
We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after testing and cleaning.
| Internal dimensions | 18”W x 20”D x 40.75”H |
| Temperature range | ambient + 7°C to 85°C |
| Rotisserie speed | 5 to 15 rpm |
| Tube capacity | 20 @ 35x300 mm 40 @ 35x40 mm |
| Electrical requirements | 115 V, 60 Hz |
| Weight | 105 lbs |
For inquiries about the Fisher Isotemp 13-247-30Q Dual Chamber Hybridization, please give us a call at 978-521-2221, or fill out the form on this page.
Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.
All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.
For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.
Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.
Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Yes – please see our repair services page for more information.
