FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
The Boekel MicroCooler II cold well incubator is a compact and convenient alternative to expensive and bulky refrigerated water baths. The MicroCooler II is an ideal way for labs to incubate or store samples at temperatures from ambient down to 18°C below ambient, typically 4°C.
The unit’s simple “press to set” controller makes it perfect for maintaining those “difficult” sub ambient temperatures such as the 14°C used in nick translations and ligation reactions or the 17°C used to store oocytes.
The MicroCooler II has a 5.75” x 2” well which accommodates a rack holding up to 21 x 1.5 mL microcentrifuge tubes. The MicroCooler II’s well has a one-piece construction which allows for the use of water or other liquids in the well.
For best temperature transfer uniformity and most efficient heat transfer, fill the cooling well with water to a depth of about 3 cm. As a matter of safe practice, volatile and flammable liquids should not be used in the MicroCooler II well.
Under typical lab ambient temperatures and low humidity, the MicroCooler II has an operating range of ambient down to 18°C below ambient, typically 4°C. The well temperature will typically fluctuate less than +/-1.0°C around the set point under normal operating conditions. Excessively high ambient temperatures or high humidity may negatively affect the MicroCooler II’s performance.
The Boekel MicroCooler II is used and reconditioned. Our technicians test all water baths to confirm that they operate properly and verify temperature with an external probe.
While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run.
Additionally, if you have specific testing requirements or requests, please inform us. We will gladly work with you to ensure these requirements are addressed during testing.
|
Temperature Range |
4°C to 22°C |
|
Accuracy |
+/- 1°C of set point |
|
Capacity |
24 x 1.5mL |
|
Well dimensions |
2.25”L x 5.75”W x 2.25”H |
|
Overall dimensions |
9.75”W x 11.34”D x 7.25”H |
|
Electrical requirements |
115V, 100W |
|
Weight |
Approx 12lbs. |
The photos above represent our equipment, which is currently stored in our warehouse. Since we often stock multiple units of each model, we may not feature photos of every unit. However, if you request, we will provide photos of your specific equipment after we test and clean it.
For inquiries about the Boekel MicroCooler II Cold Well Incubator, call us at 978-521-2221 or fill out the form on this page.
Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.
All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.
For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.
Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.
Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Yes – please see our repair services page for more information.
