4E's USA - Hematocrit Centrifuge - Brand New

Brand : 4E's USA

Product Code : SKU 0150A CENTRI

$2,050.00

Price Match Policy

Shipping

All products ship from our 30,000 sq. ft. Haverhill, MA warehouse

4E's USA Hematocrit Centrifuge – Brand New

The 4E's USA Hematocrit Centrifuge is a brand-new compact laboratory centrifuge designed for clinical laboratories, veterinary clinics, physician offices, blood testing facilities, educational laboratories, and routine hematology workflows. This hematocrit centrifuge is built specifically for spinning capillary tubes used in packed cell volume testing, hematocrit determination, and small-volume blood sample preparation.

Laboratories evaluating hematocrit centrifuges often compare tube capacity, maximum RPM, relative centrifugal force, run timer functionality, footprint, safety features, and ease of operation when selecting a centrifuge system. The 4E's USA Hematocrit Centrifuge provides a practical solution for facilities that need a dedicated, easy-to-use centrifuge for hematocrit testing and routine blood analysis.

American Instrument Exchange offers both new and refurbished laboratory centrifuges from leading manufacturers including Thermo Scientific, Beckman Coulter, Eppendorf, and 4E's USA. This brand-new hematocrit centrifuge is ready for immediate installation and routine laboratory use.

Features of the 4E's USA Hematocrit Centrifuge

Brand-new hematocrit centrifuge
Designed for packed cell volume and hematocrit testing
Compact benchtop footprint
Used with capillary tubes for small-volume blood samples
Ideal for clinical, veterinary, and physician office laboratories
Digital control interface
Fast and efficient sample processing
Easy-to-use operation
Non-refrigerated design
Low-maintenance laboratory centrifuge
Factory-new condition
Manufacturer warranty included

The 4E's USA Hematocrit Centrifuge offers an affordable, dedicated centrifugation solution for laboratories that perform routine hematocrit testing and small-volume blood sample processing.

Overview of the 4E's USA Hematocrit Centrifuge

The 4E's USA Hematocrit Centrifuge is designed specifically for hematology and small-volume blood sample workflows. Unlike general-purpose clinical centrifuges used for blood collection tubes and serum preparation, hematocrit centrifuges are optimized for capillary tubes and packed cell volume testing.

This type of centrifuge is commonly used to separate blood components in capillary tubes so laboratories can determine hematocrit percentage, evaluate packed cell volume, and support routine hematology testing. Its compact footprint and straightforward operation make it particularly attractive for physician offices, veterinary practices, outpatient clinics, educational laboratories, and smaller clinical labs.

As a brand-new centrifuge, this unit provides laboratories with factory-new condition, modern controls, and warranty support while maintaining a cost-effective price point for routine hematology applications.

Browse additional centrifuges for sale from American Instrument Exchange.

Common Applications and Refrigerated vs. Non-Refrigerated Operation

The 4E's USA Hematocrit Centrifuge is commonly used for hematocrit determination, packed cell volume testing, capillary blood sample processing, veterinary hematology, physician office laboratory workflows, educational hematology instruction, and routine blood analysis. As a non-refrigerated centrifuge, it is best suited for fast, routine hematology applications where active temperature control is not required.

For hematocrit testing and packed cell volume analysis, a non-refrigerated centrifuge provides efficient performance while minimizing maintenance requirements and overall operating costs.

Rotor Compatibility and Included Accessories

Rotor compatibility is one of the most important considerations when purchasing a hematocrit centrifuge.

This particular system includes:

Hematocrit rotor
Capillary tube rotor configuration
Power cord

The included rotor is commonly used for:

Capillary tubes
Packed cell volume testing
Hematocrit determination
Small-volume blood sample processing
Veterinary hematology workflows
Clinical diagnostic applications
Educational laboratory applications

Customers should verify included accessories prior to purchase, as centrifuge configurations can vary between systems.

4E's USA Hematocrit Centrifuge Specifications

Specification	Details
Manufacturer	4E's USA
Model	Hematocrit Centrifuge
Condition	Brand New
Centrifuge Type	Hematocrit Centrifuge
Refrigerated	No
Installation Type	Benchtop
Electrical Requirements	120V, 60Hz
Included Rotor	Hematocrit Rotor

Specifications compiled from manufacturer literature and American Instrument Exchange product information.

Power Requirements and Shipping Considerations

The 4E's USA Hematocrit Centrifuge operates on standard 120V electrical service and is designed for convenient benchtop installation. Its compact size makes it easy to place in physician offices, veterinary clinics, clinical laboratories, and educational laboratory settings.

Because this unit is factory new, it ships in manufacturer packaging designed to protect the centrifuge during transport and installation.

American Instrument Exchange can assist customers with shipping coordination and installation planning.

New Laboratory Equipment from American Instrument Exchange

In addition to refurbished laboratory equipment, American Instrument Exchange offers select new laboratory instruments and accessories for customers seeking cost-effective solutions for laboratory expansion, replacement equipment, and new facility buildouts.

Browse additional centrifuges, laboratory incubators, laboratory refrigerators and freezers, and biosafety cabinets available through American Instrument Exchange.

Service and Support

American Instrument Exchange and AIE Laboratory Services provide maintenance, diagnostics, and repair support for many laboratory centrifuge models and other laboratory equipment.

Available services may include:

Equipment diagnostics
Preventive maintenance
Operational troubleshooting
General laboratory equipment repair
Technical support

In addition to centrifuges, we also service laboratory freezers and ultralow freezers, biosafety cabinets, incubators, cryostats, and other laboratory equipment.

4E's USA Hematocrit Centrifuge Frequently Asked Questions

Is this hematocrit centrifuge new or refurbished?

This 4E's USA Hematocrit Centrifuge is brand new and has not been previously used.

What is a hematocrit centrifuge used for?

A hematocrit centrifuge is used to spin blood samples in capillary tubes so laboratories can determine packed cell volume and hematocrit percentage.

Is this centrifuge refrigerated?

No. This is a non-refrigerated hematocrit centrifuge intended for routine hematology and small-volume blood sample applications.

What types of facilities commonly use hematocrit centrifuges?

Hematocrit centrifuges are commonly used in clinical laboratories, veterinary clinics, physician offices, outpatient clinics, educational laboratories, and blood testing facilities.

Does this centrifuge include a rotor?

Yes. This centrifuge includes a hematocrit rotor designed for capillary tube applications.

How is a hematocrit centrifuge different from a general clinical centrifuge?

A hematocrit centrifuge is designed specifically for capillary tubes and packed cell volume testing, while general clinical centrifuges are typically used for larger blood collection tubes, serum preparation, and plasma separation.

Can this centrifuge be used in veterinary clinics?

Yes. Hematocrit centrifuges are commonly used in veterinary practices for packed cell volume testing and small-volume blood analysis.

Can American Instrument Exchange provide service support?

Yes. AIE Laboratory Services provides maintenance, diagnostics, and repair services for many laboratory centrifuges and related laboratory equipment.

Testing Procedures for Used and Refurbished Laboratory Centrifuges

Ensure Quality, Accuracy, and Compliance Before Deployment

Used and refurbished laboratory centrifuges from American Instrument Exchange undergo testing procedures to ensure they meet the performance, safety, and compliance standards required in modern laboratories.

Why Testing Used Laboratory Centrifuges Is Essential

Before a centrifuge is reintroduced into a lab environment, it must be tested for:

Mechanical integrity
Rotor balance and speed accuracy
Safety system functionality
Electrical compliance

Proper testing helps extend equipment lifespan, reduce downtime, and ensure safety in high-stakes lab environments such as clinical diagnostics, biotechnology, and research applications.

Our structured testing protocol for used and refurbished centrifuges ensures equipment safety, accuracy, and longevity.

Key Testing Procedures for Refurbished and Used Centrifuges

1. Initial Visual Inspection

Check for signs of wear, corrosion, or damage to housing, lid, and control panels
Inspect power cords, plugs, and connectors for fraying or exposed wiring
Confirm that the rotor and accessories are compatible and undamaged

2. Functional Testing

Power up the centrifuge and confirm successful boot-up of digital or analog displays
Test lid lock and emergency stop mechanisms
Run initial cycles at various speeds to check for abnormal noise or vibration

3. Rotor and Speed Verification

Test all programmable speed settings to confirm consistent acceleration and deceleration
Monitor temperature, vibration, and RPM consistency throughout the cycle
Balance testing ensures smooth operation and prevents wear on internal components

4. Electrical Safety and Grounding Tests

Verify that all electrical components are properly grounded and shielded

5. Temperature Control (if applicable)

For refrigerated centrifuges, test cooling function to ensure temperature stability within set ranges
Check refrigerant levels and inspect for compressor noise or failure

6. Final Quality Assurance Checklist

Conduct a full run-through using the user interface
Document all test results

Repair and Refurbishment Protocol for Used Laboratory Centrifuges

Certified Quality from American Instrument Exchange

At American Instrument Exchange, we follow a meticulous repair and refurbishment protocol to ensure that every used laboratory centrifuge we sell. We strive for reliable performance and long-term durability—providing labs with exceptional value on high-quality pre-owned centrifuges.

Why Choose a Refurbished Centrifuge from American Instrument Exchange?

Fully tested
Backed by warranty and performance guarantee
Cost-effective alternative to new lab equipment
Environmentally responsible through equipment reuse
Supported by expert technicians with decades of experience

Step-by-Step Refurbishment Protocol

Every used centrifuge at American Instrument Exchange goes through the following comprehensive repair and refurbishment process:

1. Initial Intake & Inspection

Our technicians perform a complete visual and mechanical inspection
Evaluation of hinges, seals, gaskets, and electrical components
Any physical damage, missing parts, or wear is documented for repair

2. Cleaning and decontamination

Full internal and external cleaning using non-abrasive, disinfectant-safe products
Biological or chemical residue is decontaminated/cleaned

3. Mechanical & Electrical Repairs

Damaged or worn parts (e.g., drive motors, lid latches, rotor buckets) are replaced or repaired
Electrical components, sensors, and fuses are tested and replaced as needed
Wiring is inspected for integrity and safety per industry standards

4. Rotor & Accessory Evaluation

All rotors, buckets, and adapters are inspected for cracks, corrosion, and balance
Non-conforming components are replaced with OEM or equivalent alternatives

5. Performance Testing

Rotor speed (RPM), acceleration, and deceleration are verified
Refrigerated centrifuges undergo temperature stability testing across set ranges

6. Safety System Verification

Lid lock and interlock systems are tested for proper function
Emergency stop and imbalance detection systems are verified
Electrical safety and grounding tests are conducted

Trust the Experts at American Instrument Exchange

With over 50 years of experience in the industry, American Instrument Exchange is a trusted name for refurbished lab equipment. Our centrifuge refurbishment protocol reflects our commitment to quality, safety, and customer satisfaction.

Warranty Information

All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,

Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”

Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.

Return & Cancellation Policy

American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.

Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.

Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.

Ongoing and Extended Support Options

American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.

For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.

For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.

Please contact our team at info@americaninstrument.com for more details.

FAQ

Does the equipment come with a warranty?

Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.

How do you test and recondition the equipment?

Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.

How do products ship from American Instrument Exchange?

We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.

Return and order cancellation policy

American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.

Are discounts available for educational or non-profit institutions, or for bulk purchases?

Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.

How does your price matching policy work?

We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.

Can I see the equipment in person before committing to a purchase?

Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.

1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.

Can I ship products that I purchased elsewhere to American Instrument for repair?

Yes – please see our repair services page for more information.